1 / 3
Spal Pro RS88 Polyurea
Fills and protects construction joints exposed to hard wheels and heavy loads. Opens to light traffic in 30 minutes.
- 30 minlight traffic at 21 °C
- 60 minfull traffic at 21 °C
- 0–49 °Cservice temperature
- On-site technical support
- Offices in Chile and Peru
What it's for
The joint takes the hit. The polyurea absorbs it.
On floors with forklift traffic, an open joint or a soft filler leaves the edge exposed. Spal Pro RS88 fills the joint with a semi-rigid polyurea that supports the wheel and protects the edge, while also protecting equipment wheels.
Protects the edge
Supports the wheel and keeps the edge from breaking.
Fast set
Light traffic after 30 minutes and full traffic after 60.
No staining
Leaves no residual marks on normal surfaces.
Benefits
What it means for your project
- Rated for heavy-duty service
- Harder than soft fillers, better edge protection
- Light traffic after 30 minutes and full traffic after 60 minutes (21 °C)
- Leaves no residual marks on normal surfaces
Specifications
Quick specs
| Type | Two-component semi-rigid polyurea |
|---|---|
| Use | Filling and protecting construction joints |
| Service temperature | 0 a 49 °C |
| Light traffic | 30 min at 21 °C |
| Full traffic | 60 min at 21 °C |
Pump or cartridge?
For large footage, the polyurea pump is the better choice; for small jobs, the 600 ml cartridge. We'll help you choose.
Ask for adviceFAQ
Frequently asked questions
When can I open the floor to traffic?
At 21 °C, light traffic is allowed after 30 minutes and full traffic after 60 minutes.
Does it work in cold storage?
RS88 works between 0 °C and 49 °C. For cold storage there's Spal Pro RSF, which works down to −35 °C.
Complete the slab
Related products

Spal Pro RS88 Polyurea (600 ml cartridge)
Joint filler for heavy traffic, in cartridge.

DCS Backer rod
Foam backing for sealing joints.

Spal Pro RSF Polyurea
Joint filler for cold storage.

PU 40 polyurethane sealant
Elastic sealant for pavement joints.
