Industrial concrete floors · Chile and Peru
Joint wear isn't the concrete's fault
Load transfer, joint protection and moisture control for high-traffic slabs. Every product with a technical data sheet and on-site support.
Exclusive representatives in Chile and Peru
U.S. manufacturers, with technical data sheets and direct support.
Solutions
What's happening to your floor?
Start with the symptom. We'll show you what causes it and how to fix it.

Load transfer
Joint edges break when forklifts cross them
Slabs move unevenly and the edge takes the hit. The fix is to transfer the load between slabs.
Recommended solution: DCS Diamond Dowel System

Joint protection
Joint edges spall even when sealed
The sealant doesn't protect the edge. A steel profile at the edge absorbs wheel impact.
Recommended solution: DCS Armourstrip

Vapor and moisture control
Moisture rises and the floor covering lifts
Water vapor from the ground passes through the slab. A barrier under the concrete stops it at the base.
Recommended solution: Stego Wrap 15 mil

Filling and sealing
Open joints collect dirt
Polyurea with Shore A 88–92 hardness. Open to light traffic in 30 minutes.
Recommended solution: RS88 Polyurea

Polishing
The floor dusts and stains
Hybrid silicate densifier that hardens the slab from within, even after grinding.
Recommended solution: Ameripolish 3D HSL

Repair
Cracks and spalls in an operating facility
Structural repair ready to polish in 25 minutes. Odorless and VOC-free.
Recommended solution: Rapid Refloor
Already know what you need? Browse by category
How we work
From the problem to the finished slab
01Products with technical data sheets
Every product has its technical data sheet and supporting standard. What we claim can be verified before you buy.
02On-site technical support
We review the slab, the traffic and the schedule with you, and support you through installation.
03Tools and equipment
Hand tools and Somero machinery to work with the precision the product requires.




Technical video
When should joints be filled on a new project?
The ACI 360 and ACI 302 recommendations for joint filling, explained on site by the DCS team.
Watch all videosLoad transfer
DCS Diamond Dowel System
When the slab moves at the joint, the edge breaks every time a forklift crosses it. The Diamond Dowel transfers the load and lets the slab shrink without cracking.
- PlateASTM A-36 steel, diamond-shaped
- SleeveNon-compressible pocket
- InstallationDCS Basket holds the plates level and aligned
Featured products
Most used on the jobsite

PU 40 polyurethane sealant
Seals construction joints in concrete floors and pavements. 600 ml cartridge, gray.

DCS Basket 10 mm
Immediate load transfer between slabs at sawn contraction joints.

DCS Armourstrip
Protects the joint edge from impact and wear from industrial traffic.

Ameripolish® 3D SP E™
Ready-to-use breathable sealer with UV stabilizers. 5 L, 20 L and 55-gallon containers.

Ameripolish® 3D HSL
Hybrid silicate densifier with three molecular sizes. Hardens the slab from within.
Quotes and site visits
Have a project underway? Tell us about the problem
Send us the area in m², the type of traffic and a photo of the slab. We'll reply with the solution and a quote.
- Quotes
- +56 9 8469 7500
- Shipping
- +56 9 4448 3392
- Business hours
- Monday to Friday, 8:00 to 18:00



