1 / 3
Rapid Refloor
Repairs cracks, bolt holes and spalls in floors with wheeled traffic. Ready for traffic in 15 to 30 minutes.
- 15–30 minready for traffic
- 25 mingrindable flush
- 0.4 mmcracks from
- On-site technical support
- Offices in Chile and Peru
What it's for
Today's crack is tomorrow's spall.
Cracks and bolt holes grow with every wheel pass. Rapid Refloor is a low-viscosity structural polyurea-polyurethane hybrid that penetrates the crack and leaves the repair ready to polish in minutes.
In service in minutes
Traffic in 15 to 30 minutes.
Ready to polish
Grinds flush with the floor after 25 minutes.
Virtually odorless
Suitable for operating facilities.
Benefits
What it means for your project
- Permanent structural repair in minutes
- Ready for traffic in 15 to 30 minutes
- Grinds flush with the floor after 25 minutes
- Penetrates cracks as fine as 1/64″ (0.4 mm)
- Virtually odorless
Specifications
Quick specs
| Type | Two-component structural polyurea-polyurethane hybrid |
|---|---|
| Solids | 100 % |
| Application | Dual cartridge with dispensing gun |
| Cracks | From 1/64″ (0.4 mm) |
| Preconditioning | 21 to 27 °C before use |
| Floor temperature | 0 °C or higher |
Need help choosing?
Tell us the area in m², the type of traffic and the condition of the slab. We'll help you define the solution.
Ask for adviceFAQ
Frequently asked questions
When can traffic resume?
Between 15 and 30 minutes after application.
Can it be used in the cold?
It's designed for floors at 0 °C or higher. At lower temperatures, steps must be taken to warm the concrete.



